Intel Check Cpu Temperature

admin
  1. Intel Check Cpu Temperature Online
  2. Whats My Cpu Temp
  3. Intel Check Cpu Temperature Settings
  4. Intel Processor Temp Monitor

If the temperature of your CPU gets too high, this can cause extensive damage to the unit itself as well as your computer. It is therefore important to keep an eye on the temperature. We present two easy ways to check whether your CPU is too hot.

Aug 08, 2019 The Intel® Processor Diagnostics Tool does an overall test on the unit, including a temperature test. Please install the application and run the test, at the end select the option 'File' then choose 'View File Results' and you will be able to see the report of the temperatures the processor reached during the stress test. Real Temp provides a streamlined view of the CPU temperature, including the temperature for each individual core. However, it only supports Intel Core-based processors. It will not work with AMD processors or Pentium 4 processors. If you have an Intel Core processor, you can install this program on a Windows PC running Windows 2000 to Windows 10.

CPU temperature check with the BIOS or UEFI

The most straightforward solution to check the CPU temperature is either with the BIOS or the UEFI (Unified Extensible Firmware Interface). Both interfaces can be accessed during your PC's startup. UEFI is widely known as a more modern version of BIOS. After opening the interface you will see information about the CPU temperature.

  • Mar 09, 2021 Step 1: To find out how hot your CPU is when running it, download the program from Intel’s download center and install. Step 2: While booting it up, you’ll be presented with a lot of information, but in the lower panel of the main screen. Step 3: You can also see how hard your CPU is working.
  • Under typical circumstances, your CPU temp should remain between 40 and 65 degrees Celsius (or 104°F and 149°F). Your PC temperature may vary depending on your computer, CPU, and level of activity, but anything within that window is normal and fine. The normal CPU temp for your PC may vary depending on what you have.
  • You can open the BIOS or UEFI with a designated key which is displayed during startup. Be quick. The key is only shown for a brief moment .
  • Typical shortcut keys for opening the interfaces are DEL, ESC, F1, F2, F10 or F12. Every system is different. Sometimes you have to use a key combination like Ctrl + Alt + Delete or Ctrl + Alt + Esc to activate it. Alternatively you can access it through the 'Advanced startup' option located in Recovery.
  • This version unfortunately only shows the temperature after opening the BIOS or UEFI. It's not updating it.

Easy alternative solution: CPU monitoring software

An easier and more effective way to monitor the CPU temperature is specific software. Tools like HWMonitor or SpeedFan check the active temperature of your processor while you are playing a game, working on a project or enjoying a movie. In most cases they are freeware. So you don't have to pay anything to check your CPU temperature. We show you how to use them based on HWMonitor.

  • After the initial installation you can open the software. A window with a lot of information about your system will be displayed.
  • Look for the option 'Temperatures'. Under this tab you will see every available core of your CPU and it's temperature.
  • You can keep the program running in the background to always have it on hand to keep tabs on your CPU's temperature. For example to check how hot your CPU gets while playing video games.
  • Don't forget to check the CPU temperature if you suspect it is running too hot. A CPU should heat up to a comfortable 85 to 150 degrees Fahrenheit (ca. 66 °C) during a low or normal workload. Everything above can damage the processor, especially long gaming sessions with temperatures up to 210 degrees Fahrenheit (ca. 99 °C).

Written by Dominic Schmidt

Apple

If you’d like to take a screenshot you’ll just need to know simple key combinations. We’ll show you how to take a screenshot.

Real Temp is a temperature monitoring program designed for all Intel single Core, Dual Core, Quad Core and Core i7 processors.
Each core on these processors has a digital thermal sensor (DTS) that reports temperature data relative to TJMax which is the safe maximum operating core temperature for the CPU. As your CPU heats up, your Distance to TJMax will decrease. If it reaches zero, your processor will start to thermal throttle or slow down so maximizing your distance away from TJMax will help your computer run at full speed and more reliably too.

Main Features

  • Reads temperature information from all Intel Core based processors. Pentium 4 processors are not supported.
  • Ability to individually calibrate Real Temp for each core of your CPU.
  • Program is based on temperature data gathered using a Fluke 62 IR Thermometer.
  • Test Sensors feature will check your DTS sensors for any sign of problems.
  • Keeps track of Minimum and Maximum temperatures with full logging features.
  • Reporting and logging of the Intel PROCHOT# thermal throttle activity bit.
  • Quick, very accurate and repeatable benchmark.
  • Displays MHz, TJMax, CPUID, APIC ID and Calibration settings.
  • High temperature alarm and shutdown feature based on CPU or NVIDIA GPU temperature.
  • No installation or registry modifications required.
  • Support for Windows 2000 / XP / Vista / Windows 7 / Windows 8 / Windows 10 (32 & 64 bit)

Forums

Screenshots

Documentation

See the Installation & Calibration Page.

Downloads

The latest version is available in the downloads section.

Changes in Version 3.70

  • Support for Sandy Bridge CPUs.
  • VID based power consumption estimates for the newer CPUs.
  • Improved log file formatting.
  • Added a single system tray icon that reports the maximum core temperature.
  • RealTemp GT updated for the 6 core Sandy Bridge E CPUs.
  • i7 Turbo GT 1.30 multiplier monitoring tool.

Changes in Version 3.60

Intel Check Cpu Temperature Online

  • Added Core i Turbo multiplier and Turbo TDP/TDC overclocking for Extreme / K series CPUs.
  • Added ATI GPU and improved NVIDIA GPU monitoring with CrossFire and SLI support.
  • Added a system tray / notification area font selector.
  • New Fahrenheit and 3 digit system tray option.
  • Fixed Core 2 Extreme multiplier reporting.
  • Fixed Core 2 mobile CPU C0% based load reporting.
  • Changed how Core 2 Super Low Frequency Mode (SLFM) is reported.
  • Improved sensor test consistency.
  • Bug with Reset button on ATI systems fixed.
  • RealTemp GT for the 6 core Gulftown CPUs was also updated.
  • Separate i7 Turbo GT multiplier monitoring tool for 6 core Gulftown CPUs added.

Changes in Version 3.40

Check cpu temperature windows 7
  • Core i7/i5/Xeon socket 1156 support including accurate turbo mode reporting.
  • new information window for Nvidia GPUs with improved SLI support.
  • correct reporting of Super Low Frequency Mode (SLFM) for Core 2 mobile CPUs.
  • correct reporting of Intel Dynamic Acceleration (IDA) for Core 2 mobile CPUs.
  • added VID reporting to the main GUI for Core 2 based CPUs.
  • added a Fahrenheit=1 INI file option.
  • added the option to view a Task Manager based or a C0% based load meter.
  • added the ability to toggle C1E state and view the SpeedStep (EIST) state.
  • improved dual and multi-monitor support including Anchor mode.
  • includes RealTemp GT, a 6 core version of RealTemp for Gulftown CPUs.
  • includes i7 Turbo, a high precision multiplier monitoring tool for all Core CPUs.
  • and includes LoadTester, a variable load, single core testing program.
  • Skull=1 or Skull=2 INI option for reading each CPU on a Dual Quad system.
  • thanks rge, burebista and somebody on TPU for all of your ideas and help.

Changes in Version 3.00

Intel

Whats My Cpu Temp

  • Core i7 temperature and frequency support including Turbo mode.
  • NVIDIA temperature reporting with highest GPU temperature displayed in SLI mode.
  • Ability to run a file or shutdown based on user defined alarm temperature.
  • Updated interface with modern XP / Vista style and border in Mini Mode.
  • Start Minimized Vista issues finally fixed.
  • New RivaTuner plug-in support.
  • Extra information on the main screen and the retirement of the toggle button.
  • Switch to UNICODE for better international support.
  • Adjustable GUI colors and bold System Tray font option.
  • TJMax updated based on new Intel documentation and further testing.
  • Calibration formula simplified.
  • All new CPU Cool Down Test for a more thorough look at your sensors.
  • Clock Modulation & Minimize on Close options.
  • New CPU Load meter, log file headings and Distance to TJMax in the System Tray.
  • 101 other improvements including initial Windows 7 Beta support.

Changes in Version 2.70

  • Redesigned user interface (GUI) with larger temperature fonts.
  • Added a movable Mini-Mode that is turned on and off with a double left mouse click on the GUI.
  • Added an Anchor position so the GUI will move to a fixed screen position after a double right mouse click.
  • Anchor position can be customized by holding down the Shift key while double right clicking.
  • The correct physical core order of Quad core processors is now reported based on APIC ID.
  • Added reporting of Minimum and Maximum VID as well as current VID.
  • A new user selectable high temperature alarm with two alarms for Quad core processors.
  • More accurate MHz calculation as well as FSB and CPU multiplier reporting.
  • New program Up Time feature.
  • Bug fix for log file output when using a Single or Dual core processor.
  • Fixed and improved the Default button in the Settings window.
  • Button labels and functionality changed in Settings window to follow the Windows style guide.
  • Improved multi-threading and memory usage for better long term stability.
  • Start Minimized option improved for better Vista support. See the documentation for more info.
  • Option to save the Log file in .CSV format for easy Excel support.
  • Gamer Mode temporarily retired.
Intel Check Cpu Temperature

Changes in Version 2.60

Intel Check Cpu Temperature Settings

  • Added a new Settings screen where all adjustments can be made in real time including TjMax.
  • Temperatures of any core are now displayed in the System Tray area. Thanks W1zzard!
  • 4 font options for the System Tray.
  • Choice of Current, Minimum, Maximum or Average termperature displayed in the System Tray.
  • Test Sensors feature improved to increase repeatability.
  • CPU real time MHz calculation was re-worked for better SetFSB / ClockGen support.
  • Calibration options now include one digit after the decimal point for finer adjustments.
  • Experimental Gamer Mode introduced which allows core temperatures to be seen in some games.

Intel Processor Temp Monitor

Changes in Version 2.5

Intel Check Cpu Temperature
  • Added minimize to System Tray support.
  • Correctly reports CPU MHz for the new 45nm processors.
  • Displays CPU voltage identification (VID).
  • Start minimized option and now opens and closes in the same location.

Changes in Version 2.41

  • adjustable Idle calibration for each core and expanded range from -3 to 3.
  • adjustable TjMax for each core.
  • log interval options expanded from 1 to 60 seconds.
  • a change of timers used for the benchmark feature to better support overclocking from within Windows.
  • Reset button added to the gui to reset minimum and maximum temperatures.
  • better support of the Enter and Tab keys.