Real Temp is a temperature monitoring program designed for all Intel single Core, Dual Core, Quad Core and Core i7 processors.
Each core on these processors has a digital thermal sensor (DTS) that reports temperature data relative to TJMax which is the safe maximum operating core temperature for the CPU. As your CPU heats up, your Distance to TJMax will decrease. If it reaches zero, your processor will start to thermal throttle or slow down so maximizing your distance away from TJMax will help your computer run at full speed and more reliably too.
Open Hardware Monitor is a free open source fan speed monitor software for Windows. Using this software, you can easily monitor real-time CPU and Cabinet’s fan speeds.Along with fan speed, it can also be used to monitor CPU temperature of all individual cores of CPU, CPU clock speed of individual cores, Bus Speed, CPU Load, RAM Usage, and Hard Drive Temperature. Open Hardware Monitor allows you to display all details (temperature, storage space, clocking speeds, etc) of each individual component in your computer. You can display your temperatures on your taskbar for constant monitoring. E: sorry, I should note that Open Hardware Monitor doesn't have support for Ryzen. The best entry-level Ryzen processor: Ryzen 3 3200G AMD has always offered great value for money at the lower end of the CPU spectrum, and that old adage is just as true with its Ryzen CPUs. And CPU temp monitors are the only way to achieve that; moreover, the best CPU temp monitor will give you options to solve at least some of your system’s critical “heat-related” problems by allowing you to modify various parameters, such as the speed of your CPU/GPU fan, so you mitigate the overheating issue as quickly as possible.
- Reads temperature information from all Intel Core based processors. Pentium 4 processors are not supported.
- Ability to individually calibrate Real Temp for each core of your CPU.
- Program is based on temperature data gathered using a Fluke 62 IR Thermometer.
- Test Sensors feature will check your DTS sensors for any sign of problems.
- Keeps track of Minimum and Maximum temperatures with full logging features.
- Reporting and logging of the Intel PROCHOT# thermal throttle activity bit.
- Quick, very accurate and repeatable benchmark.
- Displays MHz, TJMax, CPUID, APIC ID and Calibration settings.
- High temperature alarm and shutdown feature based on CPU or NVIDIA GPU temperature.
- No installation or registry modifications required.
- Support for Windows 2000 / XP / Vista / Windows 7 / Windows 8 / Windows 10 (32 & 64 bit)
See the Installation & Calibration Page.
DownloadsThe latest version is available in the downloads section.
Changes in Version 3.70
- Support for Sandy Bridge CPUs.
- VID based power consumption estimates for the newer CPUs.
- Improved log file formatting.
- Added a single system tray icon that reports the maximum core temperature.
- RealTemp GT updated for the 6 core Sandy Bridge E CPUs.
- i7 Turbo GT 1.30 multiplier monitoring tool.
Changes in Version 3.60
- Added Core i Turbo multiplier and Turbo TDP/TDC overclocking for Extreme / K series CPUs.
- Added ATI GPU and improved NVIDIA GPU monitoring with CrossFire and SLI support.
- Added a system tray / notification area font selector.
- New Fahrenheit and 3 digit system tray option.
- Fixed Core 2 Extreme multiplier reporting.
- Fixed Core 2 mobile CPU C0% based load reporting.
- Changed how Core 2 Super Low Frequency Mode (SLFM) is reported.
- Improved sensor test consistency.
- Bug with Reset button on ATI systems fixed.
- RealTemp GT for the 6 core Gulftown CPUs was also updated.
- Separate i7 Turbo GT multiplier monitoring tool for 6 core Gulftown CPUs added.
Changes in Version 3.40
- Core i7/i5/Xeon socket 1156 support including accurate turbo mode reporting.
- new information window for Nvidia GPUs with improved SLI support.
- correct reporting of Super Low Frequency Mode (SLFM) for Core 2 mobile CPUs.
- correct reporting of Intel Dynamic Acceleration (IDA) for Core 2 mobile CPUs.
- added VID reporting to the main GUI for Core 2 based CPUs.
- added a Fahrenheit=1 INI file option.
- added the option to view a Task Manager based or a C0% based load meter.
- added the ability to toggle C1E state and view the SpeedStep (EIST) state.
- improved dual and multi-monitor support including Anchor mode.
- includes RealTemp GT, a 6 core version of RealTemp for Gulftown CPUs.
- includes i7 Turbo, a high precision multiplier monitoring tool for all Core CPUs.
- and includes LoadTester, a variable load, single core testing program.
- Skull=1 or Skull=2 INI option for reading each CPU on a Dual Quad system.
- thanks rge, burebista and somebody on TPU for all of your ideas and help.
Changes in Version 3.00
- Core i7 temperature and frequency support including Turbo mode.
- NVIDIA temperature reporting with highest GPU temperature displayed in SLI mode.
- Ability to run a file or shutdown based on user defined alarm temperature.
- Updated interface with modern XP / Vista style and border in Mini Mode.
- Start Minimized Vista issues finally fixed.
- New RivaTuner plug-in support.
- Extra information on the main screen and the retirement of the toggle button.
- Switch to UNICODE for better international support.
- Adjustable GUI colors and bold System Tray font option.
- TJMax updated based on new Intel documentation and further testing.
- Calibration formula simplified.
- All new CPU Cool Down Test for a more thorough look at your sensors.
- Clock Modulation & Minimize on Close options.
- New CPU Load meter, log file headings and Distance to TJMax in the System Tray.
- 101 other improvements including initial Windows 7 Beta support.
Changes in Version 2.70
- Redesigned user interface (GUI) with larger temperature fonts.
- Added a movable Mini-Mode that is turned on and off with a double left mouse click on the GUI.
- Added an Anchor position so the GUI will move to a fixed screen position after a double right mouse click.
- Anchor position can be customized by holding down the Shift key while double right clicking.
- The correct physical core order of Quad core processors is now reported based on APIC ID.
- Added reporting of Minimum and Maximum VID as well as current VID.
- A new user selectable high temperature alarm with two alarms for Quad core processors.
- More accurate MHz calculation as well as FSB and CPU multiplier reporting.
- New program Up Time feature.
- Bug fix for log file output when using a Single or Dual core processor.
- Fixed and improved the Default button in the Settings window.
- Button labels and functionality changed in Settings window to follow the Windows style guide.
- Improved multi-threading and memory usage for better long term stability.
- Start Minimized option improved for better Vista support. See the documentation for more info.
- Option to save the Log file in .CSV format for easy Excel support.
- Gamer Mode temporarily retired.
Changes in Version 2.60
- Added a new Settings screen where all adjustments can be made in real time including TjMax.
- Temperatures of any core are now displayed in the System Tray area. Thanks W1zzard!
- 4 font options for the System Tray.
- Choice of Current, Minimum, Maximum or Average termperature displayed in the System Tray.
- Test Sensors feature improved to increase repeatability.
- CPU real time MHz calculation was re-worked for better SetFSB / ClockGen support.
- Calibration options now include one digit after the decimal point for finer adjustments.
- Experimental Gamer Mode introduced which allows core temperatures to be seen in some games.
Changes in Version 2.5
- Added minimize to System Tray support.
- Correctly reports CPU MHz for the new 45nm processors.
- Displays CPU voltage identification (VID).
- Start minimized option and now opens and closes in the same location.
Changes in Version 2.41
- adjustable Idle calibration for each core and expanded range from -3 to 3.
- adjustable TjMax for each core.
- log interval options expanded from 1 to 60 seconds.
- a change of timers used for the benchmark feature to better support overclocking from within Windows.
- Reset button added to the gui to reset minimum and maximum temperatures.
- better support of the Enter and Tab keys.
Home >Blog >  5 Best CPU Temperature Monitor Tools for Windows
 5 Best CPU Temperature Monitor Tools for Windows
Is your computer suffering from overheating? Why not get yourself a CPU temp monitor? This article introduces 5 best CPU temperature monitor tools for your Windows PC. Let’s read and get a reliable tool to keep an eye on CPU temp as well as your computer.
by Jeremy Jun 18, 2020
The overheating is one of the common reasons that causes computer processors' damage. Fortunately, there are more and more people realizing the importance of the temperature monitoring. If you have no idea about how to monitor computer temperature or how to make the right choice among multiple temp monitor tools, here it is.
In the following article, we put the emphasis on monitoring CPU temp, and introduces 5 best CPU temp monitor tools in 2020. They are Smart Game Booster, Speedfan, HWMonitor, Real Temp, and AID64 Extreme. Let’s see how these CPU temperature monitor tools help our computers avoid the overheating issue, and live healthy lives.
Best CPU Temperature Monitor Tools in 2020
Amd Ryzen Cpu Temp Monitor
[Editor's Choice] Best CPU Temp Monitor for Gamers
Among multiple programs, we highly recommend you use Smart Game Booster as your CPU temp monitor on Windows. We all know that CPU usually running too hot especially when gaming, while Smart Game Booster is designed for gamers and it helps acquire in-game temperatures.
Smart Game Booster not only monitors your CPU & GPU temps inside the game, but also displays all the details of the temperatures of motherboard as well as fan speed. Once any of your hardware gets overheated and raise to an unnormal temperature, this temp monitor will give you a warning alert, effectively helping the hardware and your computer from being damaged and data loss. More importantly, its CPU temp monitor feature is completely free to use, and the interface of Smart Game Booster is top and user-friendly.
By using Smart Game Booster, you can make full use of its other advanced features, including 1-click game boost, overclock, disk defrag, free driver updater and so on, to get the better PC performance and gaming experience.
Smart Game Booster 4
- Overclock Hardware
- Boost Game Speed
- Monitor PC Temperature
- Increase Game FPS
- Free Download
- Windows 10/8/8.1/7/Vista/XP
Speedfan – Popular CPU Temp Monitor
Speedfan is one of the most popular CPU temp monitors in the marketplace. The tool has very typical Windows XP interface, but don’t worry, the tool is updated on a regular basis and it provides helpful features for you to monitor CPU temperature and fan speeds. Besides the CPU temp monitor, we use its “change fan speed” function as the main feature, just like its name.
Speedfan can access digital temperature sensors on computer and change fan speeds based on the system temperatures. You are allowed to change parameters for the maximum and minimum fan speed: raise the speed to 100% when CPU gets overheated; lower the fan speed for reducing noise. In this way, you easily control the fan speeds for better performance. Speedfan is 100% compatible with Windows PC, and it works fine with all Windows OS versions.
HWMonitor – Hardware Monitoring Tool
For anyone who is looking for a great CPU temp monitor tool, HWMonitor is one of the best CPU temperature monitor programs for computers’ elements like temperatures, voltages and fans speed. It is developed by CPUID, a reliable and well-trusted software provider. Due to its frequent updates, HWMonitor supports the latest CPUs and works perfectly on Windows computers.
With this CPU temp monitor, you are able to check the temperatures of CPU, GPU, motherboard and voltages. The values will be displayed in 3 sets: current value, maximum value as well as minimum value, which makes pretty easy to catch up the situation of your PC system. If you only want a tool to monitor CPU temperature, this one is good. If you higher requirements, HWMonitor does contain the unavailability of some advanced features like fan speed control or temperature warning alarm, and it cannot meet your needs very well.
Real Temp –CPU Temperature Monitor for Intel Processors
If your computers are equipped with Intel processors, then this Real Temp is your CPU temp monitor. As one of the best CPU temperature monitor tools, Real Temp is well designed and developed for monitoring all Intel single, dual, quad core and core i5, i7 processors.
Based on temperature data gathered using a Fluke 62 IR Thermometer, Real Temp can keep track of and display your CPU temperature in real-time. Additionally, it offers useful high temp alarm and shutdown features as well.
Like we reviewed, Ream Temp is for monitoring Intel core-based processors. If your computers are running on Pentium or AMD processors, you have to look into other CPU temp monitor programs.
AIDA64 Extreme – Comprehensive Monitor Tool
No doubt, AIDA64 is another great option of monitoring CPU temperature. But in fact, it offers more than just CPU temp monitor, this feature-rich program is mostly used by power users. For example, if you have demands on overclocking your computer, you’ll like and take advantages of AIDA64 Extreme premium features.
AIDA64 Extreme supports over 250 various sensor devices to monitor temperature, fan speeds, voltages and etc. Besides this, the main features include 50 pages of information on hard configuration, stress testing module, the most accurate hardware detection capability, benchmarking, software audit and much more.
Hardware overheating issue can cause very bad results, and everyone (especially gamers who expect top gaming experience) should realize that CPU temp monitoring is essential. We hope the 5 best CPU temp monitor tools listed above can really help you out.